EgressEtch Glass Etching Stencils, Supplies, and Instruction

How To Etch Glass:

The Finishing Touches

(Click on photo for larger view)
This car collector etched a teddy bear design into the vent windows of his 1957 Chevy BelAir.


4:  The Finishing Touches


       The hard part is out of the way. Now, just a little clean-up, and you'll have a beautiful work of art!

Wash glass thoroughly to remove every trace of etching creme.

       After all the etching creme has been wiped away, thoroughly wash the glass with warm water and dish soap to remove any residue. You can take off the vinyl gloves now!


       Peel the stencil off the glass. It will come off in pieces, so be patient. You can use a utility knife to remove the small pieces. This can be a lengthy process, depending on the complexity of your design. The stencil is not reusable.

Remove the stencil.


Clean the glass.

       Wash the glass thoroughly with window cleaner and paper towels. Admire your beautiful work!


       That's all there is to etching glass the EgressEtch way. Now, you can start planning your next EgressEtch project!

    Previous Page      How To Etch Glass General Instructions   


    HOME      EMAIL EGRESS ETCH   


"How To" graphics Copyright © 1999, Scott Bascom - Technical Illustrator
Page copyright © 2000, Egress Etch and Michelle E. Crean. All Rights Reserved.
Technical problems? Contact the Webmaster!